Solar Powered Animal Repeller

1. Product Introduction

The Solar powered animal repeller can repel dogs, cats, deer, raccoons, mice, skunks, squirrels etc.

Solar Powered Animal Repeller Descriptions:
Material: ABS
Weight: 300g
Color: Green
Effective range: r=300feet
Battery: Solar battery
Power Supply:4*2/3AA Ni-MH rechargeable batteries.
Power Consumption: working=15mA standby≤10uA
Pest Type:Snakes
Feature:Sustainable, Stocked
Model Number:ZT09068
Name:Pest control ultrasonic repeller
Color:Green
Function:Snakes/Mouse/Pest Control
Material:Plastic and Solar Panel
Pest Control Type:TRAPS
Applicable Area:20-50 square meters

2. Product Parameter (Specification)

Easy installation, just insert the bar into the earth.

It is weather-proof allowing it to work all year-round and in virtually all weather conditions.

Use solar power to recharge the batteries so it is always working.

The animal repeller is use ultrasonic wave.

When the PIR sensor detects motion, the LED light will flash for 3 seconds and the ultrasonic signal will run for 15s.
Following this, the repeller will return to standby mode.

The Passive Infrared Sensor (PIR) detects motion and triggers the ultrasonic speaker emitting a tone that people cannot hear but chases away common outdoor pests like dogs, cats, deer, raccoons, mice, skunks, squirrels and more.

This solar repeller is a safe and humane way to keep unwanted animals away.

3. Packaging & Delivery

Packaging Details:Color box or Double blister

Port:Ningbo

Lead Time :

4.To Assemble and lnstall

1. Unpack the unit completely and confirm that parts are present,SEE FIGURES 1-3 above
2. Connect the repeller head,pole sections,connecting part and ground stake.SEE FIGURE1-3 above.
3. Turn power switch to “ON” position .SEE FIGURE2.
4. The PIR repeller is designed to be left ON continuously. It uses four 2/3AA size NI-MH rechargeable batteries.
5. Once turned ON,the red-LED light and ultrasonic signal will activate for 15 seconds.Among the time ,there is sound waves for 2.5 seconds.At the same time ,the white-LED lights flash blasting. Following this activation,the unit will move to stand-by mode.
6.The unit is now ready for installation.The location should allow adequate sunlight.To keep the batteries fully charged.Be sure that the area needing protection is within the effective range of the repeller SEE FIGURE2.
7. For best results,keep the repeller head roughly9-10 inches above ground.
8. Take acre not to stress or break the repeller when installing in hard ground.It is a good idea to prepare the ground for the ground stake to avoid damage to the unit.
9. When the PIR sensor detects motion,red-LED light will be lit up,The ultrasonic signal and the white-LED lights will run for 15 seconds .Following this,the Repeller will return to stand-by mode
10. When the device is working and the PIR sensor detects motion,the Device will run for other 15 seconds in the next time.

5.FAQ

Q1:What is Soaring MOQ and delivery time? 

A1:In general, our MOQ is 2000pcs,according to different market and customer's demand, the quantity can be adjust. 

And about the delivery time is 25 days after receiving the deposit.

Q2:Can you print customized logo on the product and color box?

A2:Yes, we can. Based on 5000pcs, the packing of the OEM for free.

Q3:What certificates do you have for your products?

A3:All our products have CE&RoHS certificate. We also can do it as customers' requirement.

Q4:How can I get some samples? 

A4:Sample order is acceptable. Some items are free for your test. Some items need to pay the sample fee, but all sample fee can be returnable after the final order confirmed. 

Q5:How does your factory do regarding quality control? 

A5:Quality is priority. We are always attach great importance to quality controlling from the very beginning to the very end. 100% QC inspection before packing.

Q6:What about Riddex product warranty?

A6:One year guarantee. If it is our product quality problems ,we will take full responsibility.

Q7:Whether Soaring have the capabilities of research and development and patent products?

A7:Yes,All products are researched and developed by our own engineer team. Our R&D department can completely meet or exceed your needs for product differentiated.

Q8:Where is your factory located? How can I visit there? 

A8:Our factory is located in Ningbo City, Zhejiang Province, China. You can fly to Ningbo airport or take the train to Ningbo Railway Station, we will pick you up there.